Telefon:
+49 (0)241 95 163 153
Fax:
+49 (0)241 95 163 155
E-Mail:
orders@antikoerper-online.de

AAV9 ELISA Kit

AAV9 Reaktivität: Adeno-Associated Virus 9 (AAV-9) Colorimetric Sandwich ELISA 20300000 capsids/mL - 1300000000 capsids/mL Cell Culture Supernatant, Cell Lysate
Produktnummer ABIN7448144
  • Target Alle AAV9 Produkte
    AAV9 (Adeno-Associated Virus 9 (AAV9))
    Reaktivität
    Adeno-Associated Virus 9 (AAV-9)
    Nachweismethode
    Colorimetric
    Methodentyp
    Sandwich ELISA
    Detektionsbereich
    20300000 capsids/mL - 1300000000 capsids/mL
    Untere Nachweisgrenze
    20300000 capsids/mL
    Applikation
    ELISA
    Verwendungszweck
    This kit uses sandwich ELISA to determine the titer of AAV capsids in the test sample.
    Proben
    Cell Culture Supernatant, Cell Lysate
    Analytische Methode
    Quantitative
    Spezifität
    Intact AAV wild type virions, AAV recombinant virions, Assembled AAV virions, Intact empty AAV capsids
    Sensitivität
    10200000 capsids/mL
    Bestandteile
    • Pre-coated 96-well plate
    • Reference Standard
    • Detection Antibody (20x)
    • HRP Conjugate
    • Assay Buffer (20x)
    • TMB Substrate
    • Stop Solution
    • Instruction manual
  • Applikationshinweise
    Empty AAV9 capsids lacking the transgene of interest cause unwanted immune response without providing the therapeutic benefit of the transgene. Alongside DNA and infectious titer, determination of the capsid titer is crucial for validating the efficacy and safety of your AAV gene therapy. Our titration kit detects full and empty AAV9 capsids. Note: User has the option of a rapid protocol (2 hours) for fast turnaround or a standard protocol (6 hours) for greater sensitivity.
    Probenmenge
    100 µL
    Testdauer
    2 h
    Plattentyp
    Pre-coated
    Protokoll
    1. Prepare all reagents, samples and standards,
    2. Wash plate with 1X Assay buffer
    3. Add 100μL standard or sample to each well. Incubate 1 hour at 37 °C,
    4. Aspirate and wash with 300 µL 1x Assay buffer 3 times,
    5. Add 100μL Detection Antibody. Incubate 1 hour at 37 °C,
    6. Aspirate and wash with 300 µL 1x Assay buffer 3 times,
    7. Add 100μL Streptavidin-HRP conjugate. Incubate 1 hour at 37 °C,
    8. Aspirate and wash with 300 µL 1x Assay buffer 4 times,
    9. Add 100 μL TMB Substrate. Incubate 10 minutes in the dark at 37 °C,
    10. Add 50μL Stop Solution. Read at 450nm immediately.
    Aufbereitung der Reagenzien
    1. Prepare 1X Assay Buffer (Dilute 20X Assay Buffer with distilled H2O)
    2. Prepare 1X Detection Antibody (Dilute the detection antibody (20X) with 1X Assay Buffer)
    3. Preparation of AAV capsid standards: Add 700μL of distilled H2O to one vial of standard. Dissolve at room temperature for 10-20 min, mix gently and avoid vortexing. Two-fold serial dilution of the AAV8 standard with 1X Assay Buffer for the titration curve in duplicates is recommended.
    4. Sample preparation: Dilute the sample with 1X Assay Buffer to make the capsid titer quantification fall within the linear range.
    Aufbereitung der Proben
    • It is recommended to use fresh samples without long storage, otherwise protein degradation and denaturation may occur in these samples, leading to false results. Samples should therefore be stored for a short period at 2 - 8 °C or aliquoted at -20 °C (≤1 month) or -80 °C (≤ 3 months). Repeated freeze-thaw cycles should be avoided. Prior to assay, the frozen samples should be slowly thawed and centrifuged to remove precipitates.
    • If the sample type is not specified in the instructions, a preliminary test is necessary to determine compatibility with the kit.
    • If a lysis buffer is used to prepare tissue homogenates or cell culture supernatant, there is a possibility of causing a deviation due to the introduced chemical substance. The recommended dilution factor is for reference only.
    • Please estimate the concentration of the samples before performing the test. If the values are not in the range of the standard curve, the optimal sample dilution for the particular experiment has to be determined.
    Testpräzision
    Retest any samples with CV > 10%.
    Beschränkungen
    Nur für Forschungszwecke einsetzbar
  • Lagerung
    4 °C/-20 °C
    Informationen zur Lagerung
    Store kit components at 2-8°C. The unopened kit is valid for 12 months from the production date. Reconstituted AAV standard stable at 2-8°C for 2 weeks. -20°C or below for long-term storage and avoid repeated freeze-thaw cycles.
    Haltbarkeit
    6 months
  • Target Alle AAV9 Produkte
    AAV9 (Adeno-Associated Virus 9 (AAV9))
    Andere Bezeichnung
    AAV9 (AAV9 Produkte)
Sie sind hier:
Kundenservice