Telefon:
+49 (0)241 95 163 153
Fax:
+49 (0)241 95 163 155
E-Mail:
orders@antikoerper-online.de

TNNC1 ELISA Kit

TNNC1 Reaktivität: Schwein Colorimetric Sandwich ELISA Plasma
Produktnummer ABIN956150
  • Target Alle TNNC1 ELISA Kits anzeigen
    TNNC1 (Cardiac Troponin C (TNNC1))
    Reaktivität
    • 3
    • 2
    • 2
    • 2
    • 2
    • 2
    • 2
    • 2
    • 1
    • 1
    • 1
    • 1
    Schwein
    Nachweismethode
    Colorimetric
    Methodentyp
    Sandwich ELISA
    Applikation
    ELISA
    Proben
    Plasma
    Analytische Methode
    Quantitative
    Produktmerkmale
    The high sensitivity Pig Cardiac Troponin-I ELISA recognizes an epitope on pig cTnI that is relatively resistant to proteolysis in pig plasma, thereby improving detection capability. The assay uses two different affinity purified antibodies. One is used for solid phase immobilization (on the microtiter wells). The second is conjugated to horseradish peroxidase (HRP). The plasma sample is diluted with three volumes of plasma diluent and allowed to react simultaneously with the two antibodies, resulting in cTnI being sandwiched between the solid phase and HRP-conjugated antibodies. After one hour incubation at room temperature on a plate shaker, the wells are washed to remove unbound HRP-conjugated antibodies. A solution of TMB (Tetramethylbenzidine), an HRP substrate, is then added and incubated for 20 minutes, resulting in the development of a blue color. The color development is stopped with the addition of 1N HCl changing the color to yellow. The concentration of cTnI is proportional to the absorbance at 450 nm.
    Bestandteile
    Anti-cTnI-coated microtiter wells, 96 wells
    Pig cTnI Calibrator (lyophilized), reconstitute with 0.40 mL H2O
    Calibrator Diluent, 25 mL
    Plasma Diluent, 25 mL
    cTnI HRP Conjugate, 11 mL
    Wash Solution (20X), 50 mL
    TMB Reagent, 11 mL
    Stop Solution (1N HCl), 11 mL.
    Benötigtes Material
    Pipettes: P-10, P-200 & P-1000 or equivalent
    Disposable pipette tips
    Distilled or de-ionized water
    Vortex mixer
    Absorbent paper
    Graph paper or appropriate PC graphing software
    Polypropylene microcentrifuge tubes (1.5 mL)
    Microtiter plate reader capable of reading 0 to 4 OD at 450 nm.
    Featured
    Zu unserem meistverkauften TNNI3 ELISA Kit
    Top Product
    Discover our top product TNNC1 ELISA Kit
  • Plattentyp
    Pre-coated
    Aufbereitung der Proben

    Plasma (EDTA) should be prepared as quickly as possible after blood collection and stored at 4°C. All samples should be similarly processed (i.e., storage times and temperatures should be the same for all samples). If plasma samples cannot be assayed within 4 hours of collection they should be frozen at -70°C and thawed only once prior to use. We recommend that samples be assayed in duplicate. Prior to assay, plasma samples should be diluted four fold with plasma diluent. This can easily be accomplished by mixing 100 µL of each plasma sample with 300 µL of plasma diluent in a polypropylene micro centrifuge tube.

    Testdurchführung
    1. Secure the desired number of coated wells in the holder.
      2. Dispense 100 µL of cTnI HRP Conjugate into each well.
      3. Dispense 100 µL of calibrators and diluted samples into the appropriate wells.
      4. Thoroughly mix and incubate at room temperature (18-25°C) on a plate shaker (150 rpm) for one hour.
      5. Remove the incubation mixture by flicking plate contents into a waste container.
      6. Wash and empty the microtiter wells 6 times with 1X wash solution. This may be performed using either a plate washer (400 µL/well) or with a squirt bottle. The entire wash procedure should be performed as quickly as possible.
      7. Strike the wells sharply onto adsorbent paper or paper towels to remove all residual droplets.
      8. Dispense 100 µL of TMB Reagent solution into each well.
      9. Incubate on a plate shaker (150 rpm) at room temperature for 20 minutes.
      10. Stop the reaction by adding 100 µL of Stop Solution to each well.
      11. Gently mix. It is important to make sure that all the blue color changes to yellow.
      12. Read absorbance at 450 nm with a microtiter plate reader within 5 minutes. Please note: Due to plate reader differences, the high calibrator absorbance values may be out of range occasionally. If this occurs, absorbance values may be determined at 405 nm instead.
      13. If absorbance values of the 4x diluted samples exceed those of the high calibrator, the 4x diluted plasma samples should be further diluted with calibrator diluent and re-tested. (Do not use the plasma diluent for further dilution).
    Ergebnisberechnung
    1. Calculate the mean absorbance values (A450) for each set of reference calibrators and samples.
      2. Construct a calibration curve by plotting the mean absorbance obtained from each reference calibrator against its concentration in ng/mL on graph paper, with absorbance values on the vertical or Y-axis and concentration on the horizontal or X-axis.
      3. Using the mean absorbance value for each sample, determine the corresponding concentration of cTnI in ng/mL from the calibration curve. If using graphing software, we suggest using a point-to-point or a two site binding (hyperbola) fit of the data.
      4. Multiply the derived cTnl concentrations by the dilution factor (i.e., 4, if the recommended dilution was used) to obtain the actual plasma cTnl concentration.
    Beschränkungen
    Nur für Forschungszwecke einsetzbar
  • Lagerung
    4 °C/-20 °C
    Informationen zur Lagerung
    The lyophilized reference calibrator should be stored at -20°C for optimum stability (it can be safely shipped at 4°C). The remainder of the kit should be stored refrigerated at 4°C and the microtiter plate should be kept in a sealed bag with desiccant to minimize exposure to damp air. The expiration date of the kit is indicated on the box label.
    Haltbarkeit
    The expiry date is stated on the label.
  • Target Alle TNNC1 ELISA Kits anzeigen
    TNNC1 (Cardiac Troponin C (TNNC1))
    Andere Bezeichnung
    Cardiac Troponin-1 (TNNC1 Produkte)
    Synonyme
    CMD1Z ELISA Kit, CMH13 ELISA Kit, TN-C ELISA Kit, TNC ELISA Kit, TNNC ELISA Kit, cTnC ELISA Kit, tnnc1 ELISA Kit, zgc:103465 ELISA Kit, PCTNC1 ELISA Kit, cmd1z ELISA Kit, cmh13 ELISA Kit, tnc ELISA Kit, tnnc ELISA Kit, MGC80066 ELISA Kit, TNNC1 ELISA Kit, AI874626 ELISA Kit, TnC ELISA Kit, cTnI ELISA Kit, tncc ELISA Kit, Tncc ELISA Kit, stnnc ELISA Kit, zgc:86932 ELISA Kit, troponin C1, slow skeletal and cardiac type ELISA Kit, troponin C type 1a (slow) ELISA Kit, troponin C type 1 (slow) L homeolog ELISA Kit, cardiac troponin C ELISA Kit, troponin C, cardiac/slow skeletal ELISA Kit, troponin C type 1b (slow) ELISA Kit, TNNC1 ELISA Kit, tnnc1a ELISA Kit, tnnc1.L ELISA Kit, tnnc1 ELISA Kit, Tnnc1 ELISA Kit, tnnc1b ELISA Kit
    Hintergrund
    Troponin is the inhibitory or contractile regulating protein complex of striated muscle. It is located periodically along the thin filament of the muscle and consists of three distinct proteins: troponin I, troponin C, and troponin T. The human troponin I subunit exists in three separate isoforms, two in fast-twitch and slow-twitch skeletal muscle fibers, and one in cardiac muscle. The cardiac isoform (cTnl) is about 40% dissimilar, has a molecular weight of 22,500 daltons, and has 31 additional amino acid residues that are not present on the skeletal forms. The sequence dissimilarities have allowed the development of isoform specific antibodies. The unique isoform and tissue specificity of cTnI are the basis for its use as an aid in the study of cardiac injury.
Sie sind hier:
Kundenservice